Howard Miller Quartz Clock With Rotating Pendulum And Hourly Melody

Posted on March 21, 2016 | By clockde

NOTE: There are TWO battery compartments located on both the back and bottom of the clock.

SETTING THE TIME-

 Refer to Figure 1- Back of Clock

1. Remove the cover from the back of the clock case.
2. Remove the battery cover.
3. Install a fresh “AA” alkaline battery in the battery holder
   according to the diagram inside of the holder
4. Turn the Time Set Button on the back of the movement to
   set the hands to the correct time.

ACTIVATING THE MELODY-

Refer to Figure 2- Bottom of Clock

1. Remove the battery cover from the bottom of the clock.
2. Install two fresh “C” size alkaline batteries according to the

diagram inside of the holder.

3. Slide the ON/OFF Switch to the “ON” position.
4. Press the Monitor Button to hear the melody.
5. Turn the Volume Button to adjust the melody to desired
6. The melody will play every hour on the hour when the
   switch is in the “ON” position.

STARTING THE PENDULUM-

Refer to Figure 2- Bottom of Clock

1. Install a fresh “AA” alkaline battery
   according to the diagram inside of the
   holder for the pendulum, located on
   the bottom ofthe clock.
2. Slide the Pendulum Lever on the
   pendulum movement in either
   direction to the “Start” position.
3. Turn the clock over and the
   pendulum should start to turn on its
   If it does not, give it a gentle
   push in either direction to get it
   started.

BATTERY REPLACEMENT

Figure 1- Back of Clock

Figure 2- Bottom of Clock

If the clock stops, begins to loose time, the pendulum stops, or the melody becomes weak or erratic, it is usually the indication of weak or exhausted batteries and the batteries should be replaced.

All mantel clocks are on sale at The Clock Depot with Free Shipping on ALL CHIMING MANTEL CLOCKS

Save an average of 30% on all major brands.

Posted in Clock Help and Instructions